Hashima HNX-S800NDS is a needle detector used in garment making. Its builder lists トンネルサイズ 850(W)×500(H)mm, HDD 2TB and ディスプレイ 23.8インチフルハイビジョン×2(標準). It passes finished garments or packed goods through a magnetic sensing tunnel, or over a detecting table, to find broken needles and other ferrous metal fragments.
Needle detectorGarment makingNot established
Key specifications
Specifications incomplete: 0 of 4 key figures recorded
- Detection width—
- Detection height—
- Sensitivity—
- Conveyor speed—
- Make
HashimaJapanhashima.co.jp (the builder's website, opens in a new tab) All 74 machines from Hashima - Class
- Needle detector
- Process stage
- Garment making
- Lifecycle
- Not established
Specification
| Parameter | Value |
|---|---|
| 形式 | HNX-S800NDS |
| 撮影方法 | 0°及び25°(2方向) |
| トンネルサイズ | 850(W)×500(H)mm |
| 搬送ベルト幅 | 785mm |
| ベルトスピード | 可変式15~25m/min |
| 搬送重量 | Max5kg |
| X線センサー長さ | 819.2mm |
| X線センサー画素サイズ | 0.4mm |
| X線センサー画素数 | 2048pixels |
| X線管電圧 | 30~75kV |
| X線管電流 | 0~3mA |
| OS | Windows10(64bit) |
| 搭載メモリー | 8GB |
| HDD | 2TB |
| ディスプレイ | 23.8インチフルハイビジョン×2(標準) |
| 本体サイズ | 2360(W)×1100(D)×1995(H)mm |
| 本体重量 | 900kg |
| 入力電源 | AC90~120V 50/60Hz |
| 消費電力 | 0.8KVA |
| X線漏洩線量 | 1μSV/h and below |
| 動作温度 | 5~35℃ |
| 動作湿度 | 20~80%RH(結露なき事) |
Read from the builder's published page: www.hashima.co.jp, on 2026-11-06.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.hashima.co.jp,
- Archived copy
- None recorded. The source link may not survive, and this record cannot then be checked.
- Checked by
- Textile School,
- Last changed
Related machines
Also from Hashima
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.