A straight knife cutting machine with a servo motor, described as the first servo-motor machine in the KM range. The motor runs at high speed for thick fabrics and at low speed for fabrics that fuse easily. The speed is set with a single dial and shown by indicator lamps. It is used to cut all kinds of materials.
Cutting roomGarment makingIn the builder's current range
Key specifications
Specifications incomplete: 0 of 3 key figures recorded
- Cutting height (max.)—
- Cutting speed (max.)—
- Cutting width—
- Make
HashimaJapanhashima.co.jp (the builder's website, opens in a new tab) All 74 machines from Hashima - Class
- Cutting room
- Process stage
- Garment making
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value | Unit |
|---|---|---|
| Power supply | 1P100V~240 | V |
Read from the builder's published page: www.hashima.co.jp, on 2026-11-07.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.hashima.co.jp,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Hashima
Other machines of this kind: Cutting room
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.