Home » Machinery specifications » Hashima KMC-N (KMC-5××N / KMC-7××N / KMC-9××N)

Hashima KMC-N (KMC-5××N / KMC-7××N / KMC-9××N)

Checked by an editor

A multi-ply automatic cutting machine that cuts stacked layers of fabric with a reciprocating knife. The knife is sharpened by a belt grinding system, and a blade-edge measuring device tracks the blade width after sharpening. A turbo-type suction system with automatic pressure control holds the set suction force during cutting. It is operated from a PC that takes cutting data over LAN or USB memory.

Cutting roomGarment makingIn the builder's current range

Specification

ParameterValueUnit
Product nameMulti-ply automatic cutting machine
ModelsKMC-5××N / KMC-7××N / KMC-9××N
Maximum cutting thickness of stacked layers (KMC-5××N / KMC-7××N / KMC-9××N)50 / 70 / 90mm
Effective cutting width1,600 / 1,800 / 2,000 / 2,200mm
Effective cutting length1,300 / 1,800mm
Table length770~850mm
Cutting methodKnife, reciprocating
Cutting speed1~60m/min
DrillStandard: piercing needle 1.5~3.0 mm / Option: reinforced punch No. 1~3: 3~20 mm
Knife sharpeningBelt grinding method
Suction methodTurbo type, automatic suction pressure control
Operating sideStandard: left / Option: right
Cutting conveyor surfaceNylon brush
Safety deviceStandard: bumper type / Option: sensor type
Input power supply3-phase AC200V ±10% 50/60Hz
Power consumption (as listed, two values 20KW and 27KW)20 / 27KW
Operating PCGeneral-purpose PC / OS: Windows10, 64bit
Display20-inch LCD monitor
Cutting data inputLAN, USB memory
Data formatsGBR/CAM/NC/CUT/KMC
Display languagesJapanese/English/Chinese/Vietnamese/Korean
Air supply0.5 MPa, 70 NL/min (option, knife cooling: 350 NL/min)
Operating noise<75db
Machine weight2,000~2,600kg
Operating environmentTemperature 10~43 °C, humidity <95%

Read from the builder's published page: www.hashima.co.jp, on 2026-11-07.

Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.

The record

Read from
www.hashima.co.jp,
Checked by
Textile School,
Last changed

All machinery specifications

Related machines

Report incorrect information on this page

Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.

Scroll to Top

Follow on WhatsApp

Scan with your phone’s camera to open the channel, then tap Follow.

QR code for the WhatsApp channelOr open WhatsApp on this device