- Make
- Heberlein
- Class
- Draw texturing (DTY)
- Process stage
- Spinning
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value | As published |
|---|---|---|
| APh212 | 78 … 167 | Typischer Bereich [dtex] |
| APh212 | (50 … 240) | (Max. Grenzbereich) |
| APh213 | 167 … 330 | Typischer Bereich [dtex] |
| APh213 | (110 … 390) | (Max. Grenzbereich) |
| APh215 | 240 … 450 | Typischer Bereich [dtex] |
| APh215 | (167 … 660) | (Max. Grenzbereich) |
| P211-2 | 50 … 95 | Typischer Bereich [dtex] |
| P211-2 | (20 … 110) | (Max. Grenzbereich) |
| P212-2 | 78 … 167 | Typischer Bereich [dtex] |
| P212-2 | (50 … 240) | (Max. Grenzbereich) |
| P213-2 | 167 … 330 | Typischer Bereich [dtex] |
| P213-2 | (110 … 390) | (Max. Grenzbereich) |
| P215-2 | 240 … 450 | Typischer Bereich [dtex] |
| P215-2 | (167 … 660) | (Max. Grenzbereich) |
| P312-2 | 330 … 660 | Typischer Bereich [dtex] |
| P312-2 | (240 … 720) | (Max. Grenzbereich) |
| P412-2 | 660 … 990 | Typischer Bereich [dtex] |
| P412-2 | (560 … 1200) | (Max. Grenzbereich) |
| P141-2 | … 50 | Typischer Bereich [dtex] |
| P141-2 | (… 67) | (Max. Grenzbereich) |
| P142-2 | … 67 | Typischer Bereich [dtex] |
| P142-2 | (… 95) | (Max. Grenzbereich) |
| P143-2 | 50 … 95 | Typischer Bereich [dtex] |
| P143-2 | (… 110) | (Max. Grenzbereich) |
| P243-2 | 78 … 167 | Typischer Bereich [dtex] |
| P243-2 | (67 … 200) | (Max. Grenzbereich) |
| P244-2 | 167 … 330 | Typischer Bereich [dtex] |
| P244-2 | (95 … 390) | (Max. Grenzbereich) |
| P246-2 | 240 … 450 | Typischer Bereich [dtex] |
| P246-2 | (200 … 560) | (Max. Grenzbereich) |
| P247-2 | 450 … 720 | Typischer Bereich [dtex] |
| P247-2 | (390 … 800) | (Max. Grenzbereich) |
| P141-2 | 0.9 mm | Durchmesser Luftkanal |
| P141-2 | q vn = 0.376 x (p e + 1) | Formel |
| P142-2 | 1.1 mm | Durchmesser Luftkanal |
| P142-2 | q vn = 0.562 x (p e + 1) | Formel |
| P143-2 | 1.24 mm | Durchmesser Luftkanal |
| P143-2 | q vn = 0.712 x (p e + 1) | Formel |
| P243-2 | 1.4 mm | Durchmesser Luftkanal |
| P243-2 | q vn = 0.911 x (p e + 1) | Formel |
| P244-2 | 1.57 mm | Durchmesser Luftkanal |
| P244-2 | q vn = 1.142 x (p e + 1) | Formel |
| P246-2 | 1.77 mm | Durchmesser Luftkanal |
| P246-2 | q vn = 1.451 x (p e + 1) | Formel |
| P247-2 | 2.0 mm | Durchmesser Luftkanal |
| P247-2 | q vn = 1.785 x (p e + 1) | Formel |
| P211-2 | 1.30 mm | Durchmesser Luftkanal |
| P211-2 | q vn = 0.786 x (p e + 1) | Formel |
| P212-2, APh212 | 1.4 mm | Durchmesser Luftkanal |
| P212-2, APh212 | q vn = 0.911 x (p e + 1) | Formel |
| P213-2, APh213 | 1.6 mm | Durchmesser Luftkanal |
| P213-2, APh213 | q vn = 1.189 x (p e + 1) | Formel |
| P215-2, APh215 | 1.8 mm | Durchmesser Luftkanal |
| P215-2, APh215 | q vn = 1.506 x (p e + 1) | Formel |
| P312-2 | 2.05 mm | Durchmesser Luftkanal |
| P312-2 | q vn = 1.859 x (p e + 1) | Formel |
| P412-2 | 2.5 mm | Durchmesser Luftkanal |
| P412-2 | q vn = 2.772 x (p e + 1) | Formel |
Read from the builder's published page: www.heberlein.com, on 2026-08-31.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
Related machines
Also from Heberlein
Other machines of this kind: Draw texturing (DTY)
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.