Home » Machinery specifications » Juki AMB-289

Juki AMB-289

Checked by an editor

Juki AMB-289 is a buttonhole and button sewing machine used in garment making, still in its builder’s current range. Its builder lists needle bar stroke 60.0mm and dimensions 600mm(W)×600mm(D)×400mm(H). Buttonhole machines sew and cut buttonholes, either straight lockstitch or keyhole chainstitch types, while button attaching machines sew buttons on with a programmed stitch pattern.

Buttonhole and button attachGarment makingIn the builder's current range

Key specifications

Specifications incomplete: 2 of 5 key figures recorded

Process stage
Garment making
Standards
Safety ISO 10821 Electrical equipment EN 60204-31

Specification

ParameterValueComparable
Stitch typeSingle-thread chainstitch
Normal sewing speed1,500sti/min* (neck-wrapping), 1,000sti/min* (button sewing)
ApplicationSewing of various button types (buttons to be sewn by machine)
Button sizeSewing button without neck-wrapping : φ8~φ38mm Sewing button with neck-wrapping : φ8~φ32mm Counter button : φ8~φ25mm
Display screen for setting basic shape-settingDistance between buttonholes: 1.5~6.0mm (in increments of 0.1mm) Height of neck-wrap: 0, 1.5~10.0mm (in increments of 0.1mm) Number of cross-over stitches: 2~64 (in increments of 2)
NeedleORGAN SM×332EXTLG-NY (standard needle), (at the time of delivery #14) #12~#18
ThreadSPUN / Cotton thread 500~170dtex (#60~#30CA)
Thread take-upNeedle thread take-up
Needle bar stroke60.0mm60 mm
Needle throwing systemdrived by Stepping motor
Feed systemdrived by Stepping motor
Auto-lifterdrived by Stepping motor
Cloth feeding systemdrived by Pneumatic
Thread trimming systemdrived by Pneumatic
Thread tension adjustmentActive tension (Exclusive electronic thread tension control system)
Number of data that can be inputMax. 99 patterns
Number of cycle stitch patternsThe number of registered patterns: 20 (50 patterns for one cycle)
Operation panelColor LCD touch panel: IP-420D
Button loaderProvided as standard
Product countProvided as standard (up/down system)
LubricationNo lubrication * Periodic greasing is required.
Power requirement and power consumptionSingle-phase 200~240V, 3-phase 200~240V/400VA0.32 kW
Compressed air and air consumption0.5MPa(5kgf/cm²), 11dm³/min11 m³/h
Dimensions600mm(W)×600mm(D)×400mm(H)
WeightMachine head: 65kg, Control box: 13kg

Read from the builder's published page: www.juki.co.jp, on 2026-08-26.

Standards that apply to this class

Machines of this class fall under the textile machinery standards for industrial sewing machines, units and systems.

Safety
ISO 10821 Industrial sewing machines — Safety requirements for sewing machines, units and systems — Amendment 1
Electrical equipment
EN 60204-31 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems

These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.

Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.

The record

Read from
www.juki.co.jp,
Checked by
Textile School,
Last changed

All machinery specifications

Related machines

Report incorrect information on this page

Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.

Scroll to Top

Follow on WhatsApp

Scan with your phone’s camera to open the channel, then tap Follow.

QR code for the WhatsApp channelOr open WhatsApp on this device