Juki AB-1351 is a sewing machine used in garment making, still in its builder’s current range. Its builder lists max. sewing speed 2,500sti/min, total weight 205.5kg and lift of the work clamp foot Max.14mm. It joins fabric pieces with stitches formed by a needle thread interlocked with a bobbin or looper thread, lockstitch and chainstitch being the most common types.
Sewing machineGarment makingIn the builder's current range
Key specifications
Specifications incomplete: 2 of 4 key figures recorded
- Sewing speed (max.)2 500 stitches/min
- Stitch length (max.)—
- Presser foot lift (max.)14 mm
- Needle bar stroke—
- Installed power0.22 kW
- Weight206 kg
- Compressed air0.6 m³/h
- Class
- Sewing machine
- Process stage
- Garment making
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 10821 Electrical equipment EN 60204-31
Specification
| Parameter | Value | Comparable |
|---|---|---|
| Machine head | LK-1961/ABH (Exclusive machine head based on the LK-1900A, Semi-dry-head) | |
| Max. sewing speed | 2,500sti/min* | |
| Lift of the work clamp foot | Max.14mm | |
| Hook | Standard shuttle hook | |
| Stored bartacking patterns (Stittches) | Linear bartacking (12, 15, 21, 28, 36, 41) / Zigzag bartacking (28, 36, 42, 56, 64) | |
| cross-wise | 6~23mm (15/16"~57/64")〈adjustable in increments of 0.1mm〉 | |
| Number of bartacking patterns that can be input | Max. 200 patterns, (Max. 20,000 stitches in total patterns) | |
| Number of belt-Loop sewing patterns | 99 patterns | |
| Number of cycle sewing patterns | Number of programs: 20 (30 different patterns can be set within one program.) | |
| Needle | DP × 17 #14, 135 × 17 #90 | |
| Thread | Spun 80Nm (recommend), Filament 80Nm (80Nm=#50) | |
| Belt-loop width | 8~20mm (5/16"~25/32") | |
| Power requirement / Power consumption | Single-phase 220~240V / 280VA, 3-phase 200~220V / 250VA | 0.22 kW |
| Compressed air and air consumption | 0.5MPa (5kg/cm²), 10Nl/min | 0.6 m³/h |
| Total weight | 205.5kg | 206 kg |
| Dimensions | 1,200(W) × 850(D) × 1,210mm(H) | |
| Height of the top face of the throat plate | Minimum: 930 mm (from the floor surface) | |
| Needle thread breakage detecting device | Provided as standard (Sewing can be re-started in the case of thread breakage.) | |
| Belt-loop multi-layered part detecting device | Provided as standard |
Read from the builder's published page: www.juki.co.jp, on 2026-08-26.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for industrial sewing machines, units and systems.
- Safety
- ISO 10821 Industrial sewing machines — Safety requirements for sewing machines, units and systems — Amendment 1
- Electrical equipment
- EN 60204-31 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.juki.co.jp,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Juki
Other machines of this kind: Sewing machine
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.