Home » Machinery specifications » Juki AMS-210EN Series

Juki AMS-210EN Series

Checked by an editor

Juki AMS-210EN Series is a sewing machine used in garment making, still in its builder’s current range. Its builder lists max. sewing speed 2,800sti/min and stitch length 0.1~12.7mm (0.05mm step). It joins fabric pieces with stitches formed by a needle thread interlocked with a bobbin or looper thread, lockstitch and chainstitch being the most common types.

Sewing machineGarment makingIn the builder's current range

Specification

ParameterValueComparable
Max. sewing speed2,800sti/min*
Stitch length0.1~12.7mm (0.05mm step)
Needle bar stroke41.2mm
Lift / Stroke of the intermediate presserLifting amount: 20mm / Stroke: Standard 4mm (0~10mm)
Needle thread tensionActive tension (electronic thread tension control mechanism)
HookDouble-capacity shuttle hook
Storage of pattern data in the memoryMain-body memory: Max. 500,000 stitches, 999 patterns (max. 50,000 stitches / pattern)
Enlarging / Reducing facility1~400% (0.1% step), Pattern enlargement / reduction can be done by increasing / decreasing either stitch length or the number of stitches
Bobbin thread / Product counterUp / Down system (0~9,999)
LubricationSemi-dry / hook section: minute-quantity lubrication (tank system)
Lubricating oilJUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Sewing machine motorAC servomotor 550W (direct-drive system)
Power requirement / Power consumptionSingle-phase, 3-phase 200~240V/450VA0.36 kW

Read from the builder's published page: www.juki.co.jp, on 2026-08-26.

Standards that apply to this class

Machines of this class fall under the textile machinery standards for industrial sewing machines, units and systems.

Safety
ISO 10821 Industrial sewing machines — Safety requirements for sewing machines, units and systems — Amendment 1
Electrical equipment
EN 60204-31 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems

These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.

Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.

The record

Read from
www.juki.co.jp,
Checked by
Textile School,
Last changed

All machinery specifications

Related machines

Report incorrect information on this page

Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.

Scroll to Top

Follow on WhatsApp

Scan with your phone’s camera to open the channel, then tap Follow.

QR code for the WhatsApp channelOr open WhatsApp on this device