Juki LBH-780 Series is a buttonhole and button sewing machine used in garment making, still in its builder’s current range. Its builder lists weight of the machine head 40kg, needle bar stroke 34.6mm and number of stitches 54~345 (by gear-change method). Buttonhole machines sew and cut buttonholes, either straight lockstitch or keyhole chainstitch types, while button attaching machines sew buttons on with a programmed stitch pattern.
Buttonhole and button attachGarment makingIn the builder's current range
Key specifications
Specifications incomplete: 1 of 5 key figures recorded
- Sewing speed (max.)—
- Buttonhole length (max.)—
- Button size—
- Work clamp lift (max.)—
- Needle bar stroke34.6 mm
- Stitches per cycle54–345
- Weight40 kg
- Process stage
- Garment making
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 10821 Electrical equipment EN 60204-31
Specification
| Parameter | Value |
|---|---|
| Needle bar stroke | 34.6mm |
| Max. thickness of material that can be used | 4mm (with the work clamp lowered) |
| Number of stitches | 54~345 (by gear-change method) |
| Needle | DP × 5 #11J, For JE: 134 Nm75 |
| Hook | DP type, automatic-lubricating full-rotary hook |
| Deceleration method | Belt-shifting method |
| Lubrication | Automatic |
| Lubricating oil | JUKI New Defrix Oil No.1 (equivalent to ISO VG7) |
| Motor | 300W general-purpose motor (A 250W general-purpose motor can be used when the machine is used at a sewing speed of 3,100rpm or less.) |
| Weight of the machine head | 40kg |
Read from the builder's published page: www.juki.co.jp, on 2026-08-26.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for industrial sewing machines, units and systems.
- Safety
- ISO 10821 Industrial sewing machines — Safety requirements for sewing machines, units and systems — Amendment 1
- Electrical equipment
- EN 60204-31 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.juki.co.jp,
- Checked by
- Textile School,
- Last changed
Related machines
Other machines of this kind: Buttonhole and button attach
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.
