Home » Machinery specifications » Juki LK-1903S

Juki LK-1903S

Checked by an editor

Juki LK-1903S is a buttonhole and button sewing machine used in garment making, still in its builder’s current range. Its builder lists max. sewing speed 2,700sti/min, stitch length 0.1~10mm (0.1mm step) and lift of the work clamp foot Max.13mm. Buttonhole machines sew and cut buttonholes, either straight lockstitch or keyhole chainstitch types, while button attaching machines sew buttons on with a programmed stitch pattern.

Buttonhole and button attachGarment makingIn the builder's current range

Specification

ParameterValueComparable
ApplicationStandard
Max. sewing speed2,700sti/min*
Button sizeType : Round-shaped, flat button (2-holed, 4-holed) Size : φ8~φ32mm 301 : φ8~φ20 302 : φ10~φ20 OPTION : φ15~φ328 mm
LubricationSemi-dry head (Hook: minute-quantity lubrication)
Stitch length0.1~10mm (0.1mm step)
Needle bar stroke45.7mm
Lift of the work clamp footMax.13mm
Auto-lifterProvided as standard (stepping motor type)
Needle thread tensionSpring type dial thread tension controller
Needle (at the time of delivery)DP×17 (#14)
HookStandard shuttle hook
Number of stitches that can be stored in memoryMax. 20,000 stitches
Number of standard patterns50 patterns
Number of data that can be input200 patterns
Enlarging/Reducing facility20~200% (1% step), Pattern enlargement/reduction can be done by increasing/decreasing the stitch length
Memory mediumInternal-organs memory
Bobbin thread counterProvided as standard (up/down method)
Lubricating oilJUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Sewing machine motorCompact AC servomotor (direct-drive system)
Power supply/Power consumptionSingle-phase 200~240V/250VA
WeightMachine head (include motor) 42kg, Control box 5.1kg

Read from the builder's published page: www.juki.co.jp, on 2026-08-26.

Standards that apply to this class

Machines of this class fall under the textile machinery standards for industrial sewing machines, units and systems.

Safety
ISO 10821 Industrial sewing machines — Safety requirements for sewing machines, units and systems — Amendment 1
Electrical equipment
EN 60204-31 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems

These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.

Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.

The record

Read from
www.juki.co.jp,
Checked by
Textile School,
Last changed

All machinery specifications

Related machines

Report incorrect information on this page

Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.

Scroll to Top

Follow on WhatsApp

Scan with your phone’s camera to open the channel, then tap Follow.

QR code for the WhatsApp channelOr open WhatsApp on this device