This is an automatic spreading machine that lays fabric from rolls onto a spreading table for cutting. It aligns the fabric edges with a front-sensor system, and an expander roller smooths wrinkles, which the builder says suits knit fabrics. Rolls are unwound with a double-roller bucket. A cutter device with a fabric presser cuts the fabric, and up to 100 spreading settings can be stored. The operator interface supports Japanese, English, Chinese and Vietnamese.
Spreading machineGarment makingIn the builder's current range
Key specifications
4 of 4 key figures recorded
Specification
| Parameter | Value | Unit | Comparable |
|---|---|---|---|
| Model | KMS-1600 / 1800 / 2000 / 2200SV5-FS | ||
| Maximum effective fabric width (1600 / 1800 / 2000 / 2200 mm for the four models respectively) | 1600 / 1800 / 2000 / 2200 | mm | 1 600–2 200 mm |
| Spreading table width (1600 / 1800 / 2000 / 2200 models respectively) | 1830 / 2030 / 2230 / 2430 | mm | |
| Maximum stack height (one direction) | 200 | mm | |
| Maximum fabric roll diameter | 400 | mm | |
| Maximum fabric roll weight | 60 | kg | |
| Spreading speed | 90 | m/min | |
| Voltage | 単相200V (single-phase 200 V) | V | |
| Power consumption | 1500 | W | 1.5 kW |
| Machine dimensions (KMS-1800SV5-FS), L x W x H | 2540 x 1504 x 665 | mm | |
| Machine weight (KMS-1800SV5-FS) | 350 | kg |
Read from the builder's published page: www.hashima.co.jp, on 2026-11-07.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.hashima.co.jp,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Hashima
Other machines of this kind: Spreading machine
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.