Yin SM-1A Series is a spreading machine used in garment making, still in its builder’s current range. It lays fabric ply on ply along the cutting table to form a lay, controlling tension, edge alignment and ply length and cutting each ply at the end of the lay. It follows fabric inspection and relaxation and comes before cutting; manual and automatic spreaders differ in carriage drive and roll handling.
Checked against the builder's page. On 2026-11-06 an automated check found this model named on the builder's page, www.yinusainc.com. No editor has reviewed this record.
Identity only — no specification recorded yet. This make and model are known to exist and to be traded, which is more than a superseded machine's own builder will usually tell you. Its specification is not recorded here, so this page identifies the machine and claims nothing about what it does.
Spreading machineGarment makingIn the builder's current range
Key specifications
Specifications incomplete: 0 of 4 key figures recorded
- Spreading speed (max.)—
- Fabric width (max.)—
- Roll weight (max.)—
- Roll diameter (max.)—
- Class
- Spreading machine
- Process stage
- Garment making
- Lifecycle
- In the builder's current range
Read from the builder's published page: www.yinusainc.com, on 2026-11-03.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.yinusainc.com,
- Last changed
Related machines
Also from Yin
Other machines of this kind: Spreading machine
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.