Home » Machinery specifications » Dürkopp Adler 860

Dürkopp Adler 860

Checked by an editor

Dürkopp Adler 860 is a sewing machine used in garment making, still in its builder’s current range. Its builder lists twin needle gauges 3.2 / 4.8 / 6.4 / 7.2 mm, weight 68 / 70 kg (sewing head) and stitch length 1 - 9 mm. It joins fabric pieces with stitches formed by a needle thread interlocked with a bobbin or looper thread, lockstitch and chainstitch being the most common types.

Sewing machineGarment makingIn the builder's current range

Key specifications

Specifications incomplete: 2 of 4 key figures recorded

Process stage
Garment making
Standards
Safety ISO 10821 Electrical equipment EN 60204-31

Specification

ParameterValueUnitComparableAs published
Stitches per minute2500min-1Published by the builder in German notation. The table prints "2.500*"; the asterisk is the builder's own and is not explained on the page.
Stitch length1 - 9mm
Stitch typeLockstitch (301)
Stroke of the alternating sewing feet9mm
Post bed clearanceC = 335 / D = 297mm
Clearance when sewing / liftingA = 10 / B = 20mm
Needle system134-35
Needle size100 - 130
Twin needle gauges3.2 / 4.8 / 6.4 / 7.2mmPublished by the builder in German notation. Applies to the twin-needle subclass only.
HookVertical, large (L, 26 mm diameter)
Dimensions, length / width / height1060 / 600 / 1700mmPublished by the builder in German notation. The table prints "1.060 / 600 / 1.700".
Rated power375W0.38 kW
Air requirement per stroke / air pressure0.7 / 6l / barPublished by the builder in German notation. The table prints "0,7 / 6".
Weight, sewing head68 / 70kgThe two figures are the two subclasses, 860-190322 single needle and 860-290322 twin needle.

Read from the builder's published page: www.duerkopp-adler.com, on 2026-08-25.

Standards that apply to this class

Machines of this class fall under the textile machinery standards for industrial sewing machines, units and systems.

Safety
ISO 10821 Industrial sewing machines — Safety requirements for sewing machines, units and systems — Amendment 1
Electrical equipment
EN 60204-31 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems

These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.

Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.

The record

Read from
www.duerkopp-adler.com,
Checked by
Textile School,
Last changed

All machinery specifications

Related machines

Report incorrect information on this page

Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.

Scroll to Top

Follow on WhatsApp

Scan with your phone’s camera to open the channel, then tap Follow.

QR code for the WhatsApp channelOr open WhatsApp on this device