Home » Machinery specifications » Juki MEB-3200C Series

Juki MEB-3200C Series

Checked by an editor

Juki MEB-3200C Series is a buttonhole and button sewing machine used in garment making, still in its builder’s current range. Its builder lists total weight 179kg, stitch system 1-needle and taper bar length 0mm, 3~15mm. Buttonhole machines sew and cut buttonholes, either straight lockstitch or keyhole chainstitch types, while button attaching machines sew buttons on with a programmed stitch pattern.

Buttonhole and button attachGarment makingIn the builder's current range

Key specifications

Specifications incomplete: 2 of 5 key figures recorded

Process stage
Garment making
Standards
Safety ISO 10821 Electrical equipment EN 60204-31

Specification

ParameterValueComparable
Stitch system1-needle, double chainstitch (with gimp)
Max. sewing speed400~2,200sti/min *1 (100sti/min *1 step)
Taper bar length0mm, 3~15mm
Work clamp height13mm (max. 16mm)
Method for changing stitch shapeBy selecting a program
Buttonhole cutting methodBy cut-before knife or cut-after or without buttonhole cutting
Feed systemIntermittent feed by stepping motor
Cloth cutting knife drive systemVertically driven by stepping motor
LubricationAutomatic (looper and spreader: by an oiler)
Lubricating oilJUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Compressed air and air consumption0.5MPa 6dm³/min (ANR) [8cycle/min]6 m³/h
Power requirement and power consumptionSingle-/3-phase, 550VA
Dimensions1,060mm (W)×790mm (D)×1,230mm (H)
Total weight179kg

Read from the builder's published page: www.juki.co.jp, on 2026-08-26.

Standards that apply to this class

Machines of this class fall under the textile machinery standards for industrial sewing machines, units and systems.

Safety
ISO 10821 Industrial sewing machines — Safety requirements for sewing machines, units and systems — Amendment 1
Electrical equipment
EN 60204-31 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems

These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.

Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.

The record

Read from
www.juki.co.jp,
Checked by
Textile School,
Last changed

All machinery specifications

Related machines

Report incorrect information on this page

Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.

Scroll to Top

Follow on WhatsApp

Scan with your phone’s camera to open the channel, then tap Follow.

QR code for the WhatsApp channelOr open WhatsApp on this device