Juki MEB-3900 Series is a buttonhole and button sewing machine used in garment making, still in its builder’s current range. Its builder lists sewing speed 400~2,500sti/min, stitch system 1-needle and taper bar length 3~15mm. Buttonhole machines sew and cut buttonholes, either straight lockstitch or keyhole chainstitch types, while button attaching machines sew buttons on with a programmed stitch pattern.
Buttonhole and button attachGarment makingIn the builder's current range
Key specifications
Specifications incomplete: 2 of 5 key figures recorded
- Sewing speed (max.)400–2 500 stitches/min
- Buttonhole length (max.)—
- Button size—
- Work clamp lift (max.)13 mm
- Needle bar stroke—
- Stitch length (max.)10–38 mm
- Installed power0.2 kW
- Weight110 kg
- Process stage
- Garment making
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 10821 Electrical equipment EN 60204-31
Specification
| Parameter | Value | Comparable |
|---|---|---|
| Stitching shape patterns | The machine is provided as standard with 12 different stitching shape patterns of eyelet buttonhole. As many as 87 different patterns can be stored in memory and selected. | |
| Stitch system | 1-needle, double chainstitch (with gimp) | |
| Sewing speed | 400~2,500sti/min* | |
| Stitch length | 10~38mm (Needle thread trimming type) 10~34mm (Overall thread trimming type) | |
| Needle throwing width | Mechanical adjustment of the needle throwing width : 2.0~4.0mm Compensation of the needle throwing width (by drived feeding table) : 1.5~5.0mm | |
| Taper bar length | 3~15mm | |
| Work clamp height | 13mm | |
| Method for changing stitch shape | By selecting a program | |
| Buttonhole cutting method | By cut-before knife or cut-after or without buttonhole cutting | |
| Cloth cutting knife drive system | Pneumatic | |
| Needle (at the time of delivery) | D0×558 Nm90~Nm120 (Nm110) | |
| Lubricating oil | JUKI MACHINE OIL No.18 (equivalent to ISO VG18) | |
| Compressed air | Main regulator : 0.5 MPa Hammer pressure regulator : 0.35 MPa (standard), 0.4 MPa (Max) | |
| Air consumption | 49.5 l/min (11.6 cycle/min) | |
| Power requirement and power consumption | Single-/3-phase 200-240V, 250VA | 0.2 kW |
| Weight | Machine head : 110Kg, Operation panel : 0.3Kg, Control Box : 5Kg | |
| Dimensions | Machine head : 382mm (W) × 656mm (D) × 584mm (H) Completed-product : 1,050mm (W) × 700mm (D) × 1,248mm (H) (thread stand is not included) |
Read from the builder's published page: www.juki.co.jp, on 2026-08-26.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for industrial sewing machines, units and systems.
- Safety
- ISO 10821 Industrial sewing machines — Safety requirements for sewing machines, units and systems — Amendment 1
- Electrical equipment
- EN 60204-31 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.juki.co.jp,
- Checked by
- Textile School,
- Last changed
Related machines
Other machines of this kind: Buttonhole and button attach
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.
