- Make
- Juki
- Class
- Overlock and flatlock
- Process stage
- Garment making
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value |
|---|---|
| Max. sewing speed | 6,000sti/min* |
| Needle bar stroke | 28.8mm |
| Inclination angle of the needle | 20° |
| Needle bar bushing | Upper/lower bushing method |
| Needle | DO×5 (excluding some subclass model) |
| Vertical stroke of top feed dog | 8.5mm |
| Longitudinal stroke of top feed dog | 2.7~7mm (it differs with the machine's specifications.) |
| Max. lift of the presser foot | 8mm (excluding some subclass model) |
| Max. presser foot pressure | 63.7N (6.5kgf) |
| Stitch adjusting method | By push-button |
| Bottom differential feed adjusting method | By lever (with micro-adjustment) |
| Top differential feed adjusting method | By lever (with micro-adjustment) |
| Weight of the machine head | 29kg |
| Lubrication | Automatic |
| Lubricating oil | JUKI Machine Oil 18 (equivalent to ISO VG18) |
| Needle cooler | Provided as standard |
| Needle thread heat remover | Provided as standard |
| Micro-lifter | Provided as standard |
Read from the builder's published page: www.juki.co.jp, on 2026-08-26.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
Related machines
Other machines of this kind: Overlock and flatlock
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.