Juki MO-6900R Series is an overlock machine used in garment making, still in its builder’s current range. Its builder lists weight of the machine head 29kg, needle bar stroke 24.5mm and max. lift of the presser foot 7mm. It trims the fabric edge and encloses it in looper threads in one pass, seaming and neatening knitted or woven pieces; flatlock and coverstitch machines produce flat, stretchable seams and hems.
Overlock and flatlockGarment makingIn the builder's current range
Key specifications
4 of 5 key figures recorded
- Process stage
- Garment making
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 10821 Electrical equipment EN 60204-31
Specification
| Parameter | Value | Comparable |
|---|---|---|
| Max. sewing speed | 7,000sti/min* (longitudinal stroke of top feed dog is 6mm or less) 6,000sti/min* (longitudinal stroke of top feed dog is 6~8.5mm) | |
| Bottom differential feed ratio | For gathering 1:2 (max. 1:4), For stretching 1:0.7 (max. 1:0.6) | 1:0.7–1:2 |
| Needle bar stroke | 24.5mm | |
| Inclination angle of the needle | 20° | |
| Needle mechanism | Needle bar method and upper /lower bushing | |
| Needle | DC×27 (excluding some subclass model) | |
| Vertical stroke of top feed dog | 3.5~8.5mm (it differs with the machine's specifications.) | |
| Longitudinal stroke of top feed dog | 1~7.5mm (it differs with the machine's specifications.) | |
| Max. lift of the presser foot | 7mm (excluding some subclass model) | |
| Max. presser foot pressure | 63.7N (6.5kgf) | |
| Stitch adjusting method | By push-button | |
| Bottom differential feed adjusting method | By lever (with micro-adjustment) | |
| Top differential feed adjusting method | By lever (with micro-adjustment) | |
| Weight of the machine head | 29kg | |
| Lubrication | Automatic | |
| Lubricating oil | JUKI Machine Oil 18 (equivalent to ISO VG18) | |
| Needle cooler | Provided as standard | |
| Needle thread heat remover | Provided as standard | |
| Micro-lifter | Provided as standard |
Read from the builder's published page: www.juki.co.jp, on 2026-08-26.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for industrial sewing machines, units and systems.
- Safety
- ISO 10821 Industrial sewing machines — Safety requirements for sewing machines, units and systems — Amendment 1
- Electrical equipment
- EN 60204-31 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.juki.co.jp,
- Checked by
- Textile School,
- Last changed
Related machines
Other machines of this kind: Overlock and flatlock
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.
