- Make
- Juki
- Class
- Sewing machine
- Process stage
- Garment making
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value |
|---|---|
| Max. sewing speed | 2,800sti/min* |
| Stitch length | 0.1~12.7mm (0.05mm step) |
| Needle bar stroke | 41.2mm |
| Lift / Stroke of the intermediate presser | Lifting amount: 20mm / Stroke: Standard 4mm (0~10mm) |
| Needle thread tension | Active tension (electronic thread tension control mechanism) |
| Hook | Double-capacity shuttle hook |
| Storage of pattern data in the memory | Main-body memory: Max. 500,000 stitches, 999 patterns (max. 50,000 stitches / pattern) |
| Enlarging / Reducing facility | 1~400% (0.1% step), Pattern enlargement / reduction can be done by increasing / decreasing either stitch length or the number of stitches |
| Bobbin thread / Product counter | Up / Down system (0~9,999) |
| Lubrication | Semi-dry / hook section: minute-quantity lubrication (tank system) |
| Lubricating oil | JUKI New Defrix Oil No.2 (equivalent to ISO VG32) |
| Sewing machine motor | AC servomotor 550W (direct-drive system) |
| Power requirement / Power consumption | Single-phase, 3-phase 200~240V/450VA |
Read from the builder's published page: www.juki.co.jp, on 2026-08-26.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
Related machines
Other machines of this kind: Sewing machine
Elsewhere in Garment making
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.