Home » Machinery specifications » Juki AMS-224EN Series

Juki AMS-224EN Series

Checked by an editor
Make
Juki
Class
Sewing machine
Process stage
Garment making
Lifecycle
In the builder's current range

Specification

ParameterValue
Max. sewing speed2,500sti/min* (stitch length 3mm or less)
Settable stitch length0.1~12.7mm (0.05mm step)
Needle bar stroke41.2mm
Lift of the feeding frameMax. 30mm
Lift / Stroke of intermediate presserLifting amount : 20mm / Stroke : Standard 4mm (0~10mm)
Change in height of the intermediate presserStepless control by programming (controlled by a stepping motor)
Needle thread tensionActive tension (electronic thread tension control mechanism)
Needle thread breakage detecting deviceProvided as standard
Needle thread clampStepping-motor driven clamping on the underside of the throat plate
Thread trimming deviceHigh-speed thread trimming mechanism driven by a stepping motor
HookDouble-capacity shuttle hook
Storage of pattern data in the memoryMain-body memory: Max. 500,000 stitches, 999 patterns (max. 50,000 stitches / pattern)
Enlarging / Reducing facilityPattern can be enlarged / reduced independently in the X and Y directions 1%~400% (0.1% step)
Enlarging / Reducing systemPattern enlargement / reduction can be done by increasing / decreasing either stitch length or the number of stitches (At the time of pattern selection, only the stitch length can be increased/decreased.)
Bobbin thread counter Product counterUp / Down system (0~9,999)
LubricationThe frame is lubricated with grease / The hook and hook driving shaft gear box are lubricated from a tank
Lubricating oilHook: JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Sewing machine motorCompact AC servomotor (direct-drive system)
Power requirement Power consumptionSingle-phase, 3-phase 200~240V / 550VA
Compressed air / Air consumption0.5~0.55MPa (Max. 0.55MPa) / 1.8dm³ / min (ANR)

Read from the builder's published page: www.juki.co.jp, on 2026-08-26.

Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.

All machinery specifications

Related machines

Report incorrect information on this page

Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.

Scroll to Top