Juki DX-01 is a sewing machine used in garment making, still in its builder’s current range. Its builder lists maximum sewing speed 4,000sti/min 1, needle bar stroke 30.7mm and net weight 48.6Kg. It joins fabric pieces with stitches formed by a needle thread interlocked with a bobbin or looper thread, lockstitch and chainstitch being the most common types.
Sewing machineGarment makingIn the builder's current range
Key specifications
4 of 4 key figures recorded
- Class
- Sewing machine
- Process stage
- Garment making
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 10821 Electrical equipment EN 60204-31
Specification
| Parameter | Value | Comparable |
|---|---|---|
| Specifications | Fully digital | |
| Application | Medium-weight | |
| Lubrication | Fully dry (JUKI Grease A applied only to the surface) | |
| Maximum sewing speed | 4,000sti/min * 1 | |
| Feed method | Intermittent belt feed with a direct-drive stepping motor | |
| Maximum stitch length / Maximum top feed amount | 9mm | |
| Thread trimming method | Double-edge rotary system | |
| Needle bar stroke | 30.7mm | |
| Needle | DB×1(#11)#9~#14 DP × 5 (#11) #9~#14 (Compliant with European specifications) | |
| Thread take-up | Link-type thread take-up lever | |
| Hook(Pre-installed at the factory) | Dry hook | |
| Presser foot lift amount | Auto presser lifter: 1st stage 8.0 mm (0.1 to 10.0 mm *2 ) 2nd stage 10.0 mm (2.0 to 13.5 mm *2 ) | 8 mm |
| Number of sewing patterns that can be stored | 99 patterns + 20 cycle patterns | |
| Hand switch | Standard with 3-button system (Factory settings: reverse feed stitching, one-touch changeover, one-stitch correction) | |
| Maximum stitch length | 9mm | |
| Soft-start function | Provided as standard | |
| Automatic reverse feed stitching function | Provided as standard | |
| Auto presser foot lifter device | Provided as standard (Motor type) | |
| Bobbin thread winder | Built in the top of machine head (provided with a bobbin thread retaining plate) | |
| JUKI Two-way communication function | Support through the USB • JUKI SMART App | |
| Machine head size | 517 mm × 178 mm (Distance from needle to machine arm: 310 mm) | |
| Machine head drive | Compact AC servomotor: 400W, directly connected to the main shaft (direct-drive system) | |
| Power supply / Power consumption | 600VA | |
| Net weight | 48.6Kg |
Read from the builder's published page: www.juki.co.jp, on 2026-08-26.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for industrial sewing machines, units and systems.
- Safety
- ISO 10821 Industrial sewing machines — Safety requirements for sewing machines, units and systems — Amendment 1
- Electrical equipment
- EN 60204-31 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.juki.co.jp,
- Checked by
- Textile School,
- Last changed
Related machines
Other machines of this kind: Sewing machine
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.
