Home » Machinery specifications » Juki LK-1900C Series

Juki LK-1900C Series

Checked by an editor

Juki LK-1900C Series is a sewing machine used in garment making, still in its builder’s current range. Its builder lists stitch length 0.1~10mm (0.1mm step), sewing area 40mm(X)×30mm(Y) and number of standard patterns 100 patterns. It joins fabric pieces with stitches formed by a needle thread interlocked with a bobbin or looper thread, lockstitch and chainstitch being the most common types.

Sewing machineGarment makingIn the builder's current range

Specification

ParameterValueComparable
Sewing area40mm(X)×30mm(Y)30–40 mm
Stitch length0.1~10mm (0.1mm step)
Needle bar stroke41.2mm
Lift of the work clamp footStandard 14mm (17mm when the reverse-rotation needle-up function)
Auto-lifterProvided as standard (stepping motor type)
Needle thread tensionActive tension (electronic thread tension control system)
Number of stitches that can be stored in memoryMax. 50,000 stitches
Number of standard patterns100 patterns
Number of data that can be input999 patterns
Enlarging/Reducing facility20~200% (1% step), Pattern enlargement/reduction can be done by increasing/decreasing the stitch length
Memory methodInternal memory
Bobbin thread counterProvided as standard (up/down method)
Marking lightProvided as standard (green LED)
LubricationHook: minute-quantity lubrication
Lubricating oilJUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Sewing machine motor550W compact AC servomotor (direct-drive system)
Power supply / Power consumptionSingle-phase 220-240V ・ 230VA 3-phase 200-240V / Single-phase 100-120V ・ 230VA
WeightMachine head (Control box, motor, panel) 56.9kg

Read from the builder's published page: www.juki.co.jp, on 2026-08-26.

Standards that apply to this class

Machines of this class fall under the textile machinery standards for industrial sewing machines, units and systems.

Safety
ISO 10821 Industrial sewing machines — Safety requirements for sewing machines, units and systems — Amendment 1
Electrical equipment
EN 60204-31 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems

These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.

Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.

The record

Read from
www.juki.co.jp,
Checked by
Textile School,
Last changed

All machinery specifications

Related machines

Report incorrect information on this page

Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.

Scroll to Top

Follow on WhatsApp

Scan with your phone’s camera to open the channel, then tap Follow.

QR code for the WhatsApp channelOr open WhatsApp on this device