- Make
- Juki
- Class
- Sewing machine
- Process stage
- Garment making
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value |
|---|---|
| Max. sewing speed | 2,000sti/min* |
| Max. stitch length | 7mm (forward / backward) |
| Needle | 135×17, SY3355 Nm120 (at the time of delivery) Nm100~Nm160 |
| Needle bar stroke | 38mm |
| Pitch changing method | By dial |
| Thread take-up | Slide type |
| Hook | Vertical-axis double-capacity hook |
| Lift of the presser foot | By hand: 9mm, Auto: 16mm |
| Alternating vertical movement | 1~6.5mm |
| Lubrication | Automatic |
| Lubricating oil | JUKI New Defrix Oil No.2 (equivalent to ISO VG32) |
| DL device (option) | DL25: Instantaneous change-over device for the alternate vertical movement amount The alternate vertical movement amount can be instantaneously maximized in a process for sewing a hard-to-feed part of material, such as a multilayered part, finishing with beautiful seams free from stitch gathering. |
Read from the builder's published page: www.juki.co.jp, on 2026-08-26.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
Related machines
Other machines of this kind: Sewing machine
Elsewhere in Garment making
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.