Juki MO-6900S Series is an overlock machine used in garment making, still in its builder’s current range. Its builder lists weight of the machine head 28kg, needle bar stroke 24.5mm and max. presser foot pressure 63.7N (6.5kgf). It trims the fabric edge and encloses it in looper threads in one pass, seaming and neatening knitted or woven pieces; flatlock and coverstitch machines produce flat, stretchable seams and hems.
Overlock and flatlockGarment makingIn the builder's current range
Key specifications
3 of 5 key figures recorded
- Sewing speed (max.)—
- Stitch length (max.)—
- Differential feed ratio1:0.7–1:2
- Needle bar stroke24.5 mm
- Presser foot lift (max.)7 mm
- Presser foot pressure (max.)63.7 N
- Weight28 kg
- Process stage
- Garment making
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 10821 Electrical equipment EN 60204-31
Specification
| Parameter | Value | Comparable |
|---|---|---|
| Differential feed ratio | For gathering 1:2 (max. 1:4), For stretching 1:0.7 (max. 1:0.6) | 1:0.7–1:2 |
| Needle bar stroke | 24.5mm | |
| Inclination angle of the needle | 20° | |
| Needle bar bushing | Upper/lower bushing method | |
| Needle | DC×27(excluding some subclass model) | |
| Max. lift of the presser foot | 7mm(excluding some subclass model) | |
| Max. presser foot pressure | 63.7N (6.5kgf) | |
| Stitch adjusting method | By push-button | |
| Differential-feed adjusting method | By lever (with micro-adjustment) | |
| Weight of the machine head | 28kg | |
| Lubrication | Automatic | |
| Lubricating oil | JUKI Machine Oil 18 (equivalent to ISO VG18) | |
| Needle cooler | Provided as standard | |
| Needle thread heat remover | Provided as standard | |
| Micro-lifter | Provided as standard |
Read from the builder's published page: www.juki.co.jp, on 2026-08-26.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for industrial sewing machines, units and systems.
- Safety
- ISO 10821 Industrial sewing machines — Safety requirements for sewing machines, units and systems — Amendment 1
- Electrical equipment
- EN 60204-31 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.juki.co.jp,
- Checked by
- Textile School,
- Last changed
Related machines
Other machines of this kind: Overlock and flatlock
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.
