Home » Machinery specifications » Juki MOL-254

Juki MOL-254

Checked by an editor
Make
Juki
Class
Sewing machine
Process stage
Garment making
Lifecycle
In the builder's current range

Specification

ParameterValue
Machine headComputer-controlled, 2-needle, lockstitch bartacking machine
Max. sewing speed2,500sti/min*
Thread take upLink type
Needle bar stroke45.7mm
ThreadSpun thread, cotton thread #50~#30, B33~B46, Nm=120/3~60/3
Needle (at the time of delivery)DP×17 (#21) #19~#21
HookHorizontal-axis 1.8 fold-capacity shuttle hook
Lift of the presser foot21mm
Number of stitches28, 36, 42 (selectable on the operating panel)
Needle gauge43~70mm (1-11/16"~2-3/4")
Bartacking length7~22mm (9/32"~55/64") ‹adjustable in increments of 0.1mm›
Bartacking width1~3.2mm (3/64"~1/8") ‹adjustable in increments of 0.1mm›
Belt-loop width9~20mm (23/64"~25/32")
Finished length of belt-loop48~78mm (1-57/64"~3-5/64")
Machine time1.2 sec./belt-loop (28 stitch)
Positioning of the front hookDriven by motor (the distance between the hook can be established in increments of 0.01mm)
Bobbin winderElectric type (provided as standard)
LubricationCentralized oil wick lubrication (machine head)
Lubricating oilJUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Power requirement and power consumptionSingle-phase, 3-phase 200~240V/350VA
Compressed air and air consumption0.5MPa (5kgf/cm²), 32Nl/min
Total weight230kg
Dimensions1,200mm (W)×800mm (D)×1,350mm (H: in its lowest end)

Read from the builder's published page: www.juki.co.jp, on 2026-08-26.

Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.

All machinery specifications

Related machines

Report incorrect information on this page

Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.

Scroll to Top