- Make
- Juki
- Class
- Sewing machine
- Process stage
- Garment making
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value |
|---|---|
| Max. stitch length | 12mm (forward / backward) |
| Thread take-up | Link type |
| Needle bar stroke | 40mm |
| Alternating vertical movement | 1~9mm |
| Alternating vertical movement adjusting method | Dial |
| Safety mechanism | Provided as standard |
| Bobbin thread winder | Built in the machine arm |
| Bottom-feedmicro-adjustment mechanism | Provided as standard |
| Lubrication | Automatic (Tank system) |
| Distance from needle to machine arm | 347mm |
| Post height | 170mm |
| Power requirement/Power consumption | Single-phase 100~120V / 200~240V, 3-phase 200~240V / 193VA (with automatic thread trimmer) |
Read from the builder's published page: www.juki.co.jp, on 2026-08-26.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
Related machines
Other machines of this kind: Sewing machine
Elsewhere in Garment making
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.