Juki MOL-254N is a sewing machine used in garment making, still in its builder’s current range. Its builder lists max. sewing speed 2,500sti/min, total weight 230kg and lift of the presser foot 21mm. It joins fabric pieces with stitches formed by a needle thread interlocked with a bobbin or looper thread, lockstitch and chainstitch being the most common types.
Sewing machineGarment makingIn the builder's current range
Key specifications
Specifications incomplete: 2 of 4 key figures recorded
- Sewing speed (max.)2 500 stitches/min
- Stitch length (max.)—
- Presser foot lift (max.)21 mm
- Needle bar stroke—
- Needle gauge43–70 mm
- Installed power0.28 kW
- Weight230 kg
- Compressed air1.92 m³/h
- Class
- Sewing machine
- Process stage
- Garment making
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 10821 Electrical equipment EN 60204-31
Specification
| Parameter | Value | Comparable |
|---|---|---|
| Machine head | Computer-controlled, 2-needle, lockstitch bartacking machine | |
| Max. sewing speed | 2,500sti/min* | |
| Thread take up | Spun thread, cotton thread #50~#30, B33~B46, Nm=120/3~60/3 | |
| Needle (at the time of delivery) | DP×17 (#21) #19~#21 | |
| Hook | Horizontal-axis 1.8 fold-capacity shuttle hook | |
| Lift of the presser foot | 21mm | |
| Number of stitches | 28, 36, 42 (selectable on the operating panel) | |
| Needle gauge | 43~70mm (1-11/16"~2-3/4") | |
| Bartacking length | 7~22mm (9/32"~55/64") ‹adjustable in increments of 0.1mm› | |
| Bartacking width | 1~3.2mm (3/64"~1/8") ‹adjustable in increments of 0.1mm› | |
| Belt-loop width | 9~20mm (23/64"~25/32") | |
| Finished length of belt-loop | 48~78mm (1-57/64"~3-5/64") | |
| Machine time | 1.2 sec./belt-loop (28 stitch) | |
| Positioning of the front hook | Driven by motor (the distance between the hook can be established in increments of 0.01mm) | |
| Bobbin winder | Electric type | |
| Lubrication | Centralized oil wick lubrication (machine head) | |
| Lubricating oil | JUKI New Defrix Oil No.2 (equivalent to ISO VG32) | |
| Power requirement and power consumption | Single-phase, 3-phase 200~240V/350VA | 0.28 kW |
| Compressed air and air consumption | 0.5MPa (5kgf/cm²), 32Nl/min | 1.92 m³/h |
| Total weight | 230kg | |
| Dimensions | 1,200mm (W)×800mm (D)×1,350mm (H: in its lowest end) |
Read from the builder's published page: www.juki.co.jp, on 2026-08-26.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for industrial sewing machines, units and systems.
- Safety
- ISO 10821 Industrial sewing machines — Safety requirements for sewing machines, units and systems — Amendment 1
- Electrical equipment
- EN 60204-31 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.juki.co.jp,
- Checked by
- Textile School,
- Last changed
Related machines
Other machines of this kind: Sewing machine
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.
